Number Plate Light - Opel MERIVA Owner's Manual

176 Vehicle care
4. Insert bulb holder and turn
clockwise.
5. On left side: insert front end into
front wing, slide forward and insert
rear end.
On right side: insert rear end into
front wing, slide rearward and
insert front end.

Number plate light

1. Insert screwdriver in recess of the
cover, press to the side and
release spring.
2. Remove lamp downwards, taking
care not to pull on the cable.
3. Remove bulb holder from lamp
housing by turning anticlockwise.
4. Pull bulb from bulb holder and
replace it.
5. Insert bulb holder into lamp
housing and turn clockwise.
6. Insert lamp into bumper and let
engage.
Interior lights
Courtesy light, reading lights
Have bulbs replaced by a workshop.
Load compartment light
Have bulbs replaced by a workshop.