Opel MERIVA Owner's Manual page 176

174 Vehicle care
3. Carefully withdraw the light
assembly from retaining pins and
remove. Make sure that the cable
duct remains in position.
4. Detach the wiring plug from the
bulb carrier.
5. Unlatch the four retaining lugs and
remove the bulb carrier.
6. Remove and replace the bulb.
Tail light and brake light (1)
Tail light (2)
Turn signal light (3)
7. Insert the bulb carrier into the tail
light assembly. Connect the
wiring plug. Fit light assembly
onto retaining pins and tighten the
securing nuts. Close the cover
and engage.
8. Switch on the ignition, operate
and check all lights.
Tail lights in the tailgate frame
1. Open the tailgate and remove the
cover with a screwdriver.