Side Turn Signal Lights - Opel MERIVA Owner's Manual

Hide thumbs Also See for MERIVA:
Table of Contents

Advertisement

2. Press the retaining lug and
remove the bulb carrier
downwards.
3. To replace the reverse light bulb
(1), remove and replace the bulb
To replace the tail light bulb (2),
push the bulb slightly into the
socket, rotate anticlockwise,
remove and replace the bulb.
4. Insert the bulb carrier into the
retainer.
5. Attach the cover.
6. Switch on the ignition, operate
and check all lights.
For replacing the tail light bulb and
rear fog light bulb on the right side of
the tailgate frame, proceed in the
same way.

Side turn signal lights

To replace bulb, remove lamp
housing:
1. On left vehicle side, slide lamp to
the front and remove it out of the
front wing with the rear end.
On right vehicle side, slide lamp to
the rear and remove it out of the
front wing with the front end.
Vehicle care
2. Turn bulb holder anticlockwise
and remove from housing.
3. Pull bulb from bulb holder and
replace it.
175

Advertisement

Table of Contents
loading

Table of Contents