Number Plate Light; Interior Lights; Electrical System; Fuses - Opel COMBO Owner's Manual

Number plate light

1. Insert a screwdriver, for example,
in the recess of the cover and
remove it.
2. Pull the bulb from the bulb holder
and replace it.
3. Attach the cover.

Interior lights

Have the following bulbs replaced by
a workshop:
● courtesy light, reading lights
● load compartment light
● instrument panel illumination
Vehicle care

Electrical system

Fuses

Data on the replacement fuse must
match the data on the defective fuse.
There are two fuse boxes in the
vehicle:
● engine compartment
● instrument panel
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its
melted wire.
Caution
Do not replace the fuse until the
cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
227