Contents 1 Safety 7 Play from a storage device Control play Switch tracks 2 Your car audio system Introduction 8 Play from an iPod/iPhone What's in the box Overview of the system Compatible iPod/iPhone models Connect your iPod/iPhone Control play 3 Install the car audio system Charge your iPod/iPhone Connect wires...
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
ID3 tag V2.0 or later Congratulations on your purchase, and • Unsupported files: welcome to Philips! To fully benefit from the AAC, WAV, and PCM files support that Philips offers, register your product DRM protected WMA files (.wav, .m4a, at www.philips.com/welcome.
Overview of the system t srq l k j i h • Unlock the front panel. • Return to the previous menu. • For iPod/iPhone, press repeatedly to select a control mode: control play on • For .wma and .mp3 tracks on a storage the iPod/iPhone or on this product.
Page 6
f AUDIO-IN • In FM/MW radio mode, press and hold • Connect to the audio output socket to store the current radio station at (usually the headphone socket) of an channel No. 2. external device. • For .wma and .mp3 tracks on a storage device, press to access the folder list.
3 Install the car • For .wma and .mp3 tracks on a storage audio system device, press to select the next folder. • In DAB mode, press and hold to access the list of stored stations. • In a mode other than DAB mode, Caution press and hold to activate the selection of listening zones.
Black strip Ground Connect wires Yellow strip To the +12V car battery which is Note energized at all times • Make sure that all loose leads are insulated with electrical tape. • Consult a professional to connect wires as instructed Connect other wires if necessary.
Secure the DAB radio receiver to your car. • The pin arrangement for the ISO connectors depends on the type of your vehicle. To avoid damage to the unit, connect properly. Connect the DAB radio receiver Note • The DAB radio receiver and DAB radio antenna are not bundled.
Page 10
Remove the mounting sleeve with the Slide the unit into the sleeve until you hear supplied disassembly tools. a "click". Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. Attach the trim plate. Reconnect the negative terminal of the car battery.
Detach the front panel Attach the front panel Note Insert the notch on the front panel to the chassis on the main unit. • Before you insert an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the system is turned off.
Press to turn on the system. Rotate clockwise to set the minute. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. • When one of the following options is The system can automatically synchronize its clock...
5 Listen to FM/ Select a listening zone MW radio Press and hold until one of the stations following options is displayed. • [ALL]: For all passengers [FRONT-L]: For the front-left seat only • [FRONT-R]: For the front-right seat • only [FRONT]: For front passengers only •...
Store radio stations automatically Select a tuner sensitivity Press repeatedly to select a band. To search for radio stations with strong signals Press and hold AS/SOURCE until only or more radio stations, you can change the [STORE---] is displayed. tuner sensitivity. »...
Page 15
Rotate to select [RDS ON]. CHILDREN Children’s programs » The RDS function is enabled. SOCIAL Social Affairs • To disable the RDS function, rotate RELIGION Religion to select [RDS OFF]. PHONE IN Phone In TRAVEL Travel Select a program type LEISURE Leisure JAZZ...
6 Listen to DAB Receive traffic announcement radio stations If you want to receive traffic announcement, enable the TA (Traffic Announcement) function. Press and hold to access the system menu. Press repeatedly until [TA ON] or Note [TA OFF] is displayed. Rotate to select a setting.
• To tune to a programmed radio Tune to a detected station station, press its corresponding Press to exit the system menu. numeric button Press again to access the list of detected , , or stations. » is displayed. Program stations manually Press repeatedly or rotate Tune to the target detected station (see...
Rotate to select an option, and then Set up for weak reception press to confirm. [ANTENNA OFF]: Disable the DAB • When the current reception gets poor, the reception. product can automatically switch the source or [ANTENNA 12V]: Enable the DAB •...
[SD/SDHC]: For an SD/SDHC card that is inserted into the slot Note If the play does not start, press • Philips does not guarantee compatibility with all storage devices. • NTFS (New Technology File System) file system is not Control play supported.
8 Play from an Switch tracks iPod/iPhone During play, you can switch tracks or folders quickly. Switch tracks directly Note Press to access the track list. • During play, no audio signals are transferred through » The file name of current track scrolls. the headphone socket of your iPod/iPhone.
Press AS/SOURCE repeatedly to switch Search for a track the source to [FRONT USB] (Front USB socket) or [REAR USB] (Rear USB After accessing the iPod/iPhone menu, you can connector). select a specific track quickly. » The system starts playing tracks that Press to access the iPod/iPhone menu.
Connect a device Note • You can also complete the disconnection on your device. • Philips does not guarantee the compatibility with all Bluetooth devices. • Before pairing a device with this system, read its user manual for Bluetooth compatibility. •...
Redial the last called number Play audio from a Bluetooth device Press . » [REDIAL] is displayed. If the connected Bluetooth device supports Press to confirm. Advanced Audio Distribution Profile (A2DP), » [CALLING] is displayed. you can listen to tracks that are stored on the device through the system.
10 Listen to an 11 Adjust sound external player The following operations are applicable to all supported media. You can use the system to amplify the audio Button Function input from an external player, for example, MP3 Rotate to increase or decrease the player.
Log in with your account on the prompt » All settings are reset to factory default. Web page. • If you have no account for Club Philips, Replace the fuse create one first on this Web page. Search your product with "CE153DR/05"...
Check the current firmware version of this product. (see 'Check the current version of DAB firmware' on page 17) Go to www.philips.com/support. Note Log in with your account for Club Philips. • Specifications are subject to change without prior » Support information about your notice.
Bluetooth 2.0 specification product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available.
The paired mobile phone connects and Cannot switch the source to iPod/iPhone disconnects constantly. • Check whether the iPod/iPhone is securely • connected. The Bluetooth reception is poor. Move • Check whether the iPod/iPhone is the mobile phone closer to the system or compatible with this system.
® This product complies with the radio registered trademarks owned by Bluetooth interference requirements of the European SIG, Inc. and any use of such marks by Philips is Community. under license. Care of the environment Windows Media and the Windows logo...