Electrical
Requirements
Electrical
Shock
Hazard
Plug into a grounded
3 prong
outlet.
Do not remove
ground
prong.
Do not use an adapter,
Do not use an extension
cord.
Failure
to follow
these
instructions
can resu|t in death,
fire, or electrical
shock.
Volts: 120A.C.
Hertz: 60 Hz
NOTE:
The power rating for your Stand
Mixer is printed on the serial plate.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician
or serviceman
install an outlet
near the appliance.
The maximum
rating is based on the
attachment
that draws the greatest load
(power).
Other
recommended
attachments
may draw significantly less power.
Proof of Purchase
& Product
Registration
Always keep a copy of the itemized
sales receipt showing the date of purchase of your
Stand Mixer. Proof of purchase will assure you of in-warranty
service. Before you use
your Stand Mixer, please fill out and mail your product
registration
card packed with
the unit. This card will enable us to contact you in the unlikely event of a product
safety
notification
and assist us in complying
with the provisions
of the Consumer
Product
Safety Act. This card does not verify your warranty.
Please complete
the following
for your personal records:
Model
Number
Serial
Number
Date
Purchased
Store Name