Important Safeguards; Electrical Requirements - KitchenAid KSB465 Instructions Manual

iMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and/or injury to persons including the following:
1. Read all instructions. 8. Do not let cord hang over edge of
2. To protect against risk of electrical
shock, do not put Blender in water or
other liquid.
3. Close supervision is necessary when
any appliance is used by or near
children.
4. Unplug from outlet when not in use,
before putting on or taking off parts,
and before cleaning.
5. Avoid contact with moving parts.
6. Do not operate the Blender with
a damaged cord or plug or after
appliance malfunctions, or is dropped
or damaged in any manner. Return
appliance to the nearest Authorized
Service Center for examination, repair
or electrical or mechanical acljustment.
7. Do not use outdoors.
table or counter.
9. Keep hands and utensils out of
container while blending to reduce
the risk of severe injury to persons or
damage to the Blender. A scraper may
be used but must be used only when
the Blender is not running.
10. Blades are sharp. Handle carefully.
11. Always operate Blender with cover in
place.
12. The use of attachments, including
canning jars, not recommended by
KitchenAid may cause a risk of injury
to persons.
13. When blending hot liquids, remove
center piece of two-piece cover.
14. This product is designed for
household use only.
SAVE THESE INSTRUCTIONS
Electrical Requirements
Volts: 120 Volts A.C.
Hertz: 60 Hz
NOTE: Your Blender has a 3-prong
grounded plug. To reduce the risk of
electrical shock, this plug will fit in an
outlet only one way. If the plug does
not fit in the outlet, contact a qualified
electrician. Do not modify the plug in
any way.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman install
an outlet near the appliance.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.