Electrical Requirements; Parts And Features; Exhaust Ventilation - Kenmore 665.63792 Use & Care Manual

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Observe all governing codes and ordinances. A 120 Volt, 60 Hz,
AC only, 15- or 20-amp fused electrical supply is required. (A
time-delay fuse or circuit breaker is recommended.) It is
recommended that a separate circuit serving only this appliance
be provided.
GROUNDING iNSTRUCTiONS
[] For all cord connected appliances:
The microwave oven must be grounded. In the event
of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for
the electric current. The microwave oven is equipped
with a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is
properly installed and grounded.
WARNING:
Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions
are not completely understood, or if doubt exists as to
whether the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician or serviceman
install an outlet near the microwave oven.
[] For a permanently connected appliance:
This appliance must be connected to a grounded,
metallic, permanent wiring system, or an equipment
grounding conductor should be run with the circuit
conductors and connected to the equipment
grounding terminal or lead on the appliance.
SAVE THESE iNSTRUCTiONS
PARTS AND FEATURES
This manual may cover several different models. The model you
have purchased may have some or all of the features shown here.
The appearance of your particular model may differ slightly from
the illustrations in this manual.
3
4 5 6
12 15 13 14 13 12 1110
1. Door Handle 11. Exhaust Fan and Cooktop
2. Door Safety Lock System Light Controls
3. Metal-Shielded Window !2. Cooktop Lights
4. 3M FILTRETE
TM
Charcoal Odor !3. Grease Filters
Filter (behind vent grille)
5. Grill Element
6. Microwave Inlet Cover
7. Oven Light
8. Vent Grille
9. Touch Screen Display
10. Dial and Control Pads
14. Cooking Rack
!5. Model and Serial Number Plate
Parts and Features Not Shown
Turntable
Grill Rack
Sklllette Pan and Handle
The first time power is supplied to the oven the "Welcome"
screen will appear, prompting the selection of the venting method
being used.
The method of ventilation determines whether or not the odor
filter (3M FILTRETF M charcoal filter) will be used. If the setting is
Recirculation, the odor filter will be used, and the oven will track
the filter usage and give prompts for its changing. If the setting is
External Venting, the odor filter will not be used, and the oven will
not track or give prompts for odor filter status.
To determine how the venting was installed, turn on the exhaust
fan and check the airflow. If air is coming from the top front of the
oven, it is being recirculated. If there is a vent outside through
which the air is being vented, the oven has External Venting.
If the "Welcome" screen does not appear, the default setting has
already been selected. The current setting may be checked for
correctness, and may also be changed at any time through the
Options menu.
To Check or Change Exhaust Setting:
1. On "Home" screen, touch "More Choices."
2. Touch"Options."
3. Touch "More Choices."
4. Touch "Exhaust/Odor Filter."
5. Touch "Exhaust Setting."
The current setting will be displayed, as well as the option to
change the setting.
6. Touch "Finished" if the setting is changed.