Kenmore 100.06912 Use & Care Manual page 5

ASSEMBLY cant
L _
V
4. On the Bowl Cover are the food chute, big food pusher,and small food pusher,
which serves as a housing for the food pusher. Also included is the shaft
containing the spring mechanism that controls the pusher lock used to lock
big food pusher lid into place. These are part of the Bowl Cover assembly.
5. Place the Bow! Cover Assembly onto the Bowl. Align the arrow on the Cover
and the unlock icon on the Bowl (see Fig,2 and 2a)-. Turn the Cover
counterclockwise towards the center front until it clicks.
NOTE: There is only one position for the Bowl Cover to lock onto Bowl. The
unit will not operate if the Bowl Cover does not lock onto the Bowl, or if big
food pusher Lid does not latch onto the Food Chute.
6. Make sure big food pusher is securely latched into place.
7. Pull the big food pusher into place and lock, the unit is ready to operate.
Fig. 3
:" .
8. When the food pusher is not being used to feed items down through the food chute,
• • it should be locked into place in the movable loop. This is usually the case when using
blades down in the bow/instead of discs at the top of the bowl.
5