Kenmore 100.06912 Use & Care Manual page 11

If you should ever need replacement parts for this food processor,
contact 1-800-4-MY-HOME.
NOTE: DO NOT ATTEMPT to sharpen the cutting edges of the any Blade or Disc, They
are permanently sharpened at the factory and will be ruined by attempted sharpening.
t. Before cleaning, be sure the food processor cord is unplugged.
2. Whenever passible, rinse parts immediately after each processing for easy cleanup,
3. Wipe the Base, Control Panel, and feet with o damp cloth and dry thoroughly. Stubborn
spots can be removed by rubbing with a damp c[othand a mild, non-abrasive cleaner.
DO NOT immerse the Base in liquid.
4. All removabie parts can be washed by hand or in a dishwasher in the top rack. Do not
put in or near the utensil basket.
5.
' 6,
If washing removable parts by hand, wash in hot, sudsy water, rinse and dry thoroughly,
if necessary use a small nylon bristle brush to thoroughly clean the Bowl and Bowl
Cover Assembly. This type of brush will also help prevent cutting yourself on the
Chopping Blade and Slicing/Shredding Disc.
7. Do not use rough scouring pads or cleansers on any plastic or metal parts.
8.Do not fill the Bowl with boiling water or place any of the parts in boiling water,
9. Some foods, such as carrots, may temporarily stain the Bowl. To remove stains, make
a paste of 2 tablespoons baking soda and 1 tablespoon warm water. Apply the paste
to the stains and rub with a cloth. Rinse and dry.
1!