Setting The Clock; Changing Between Continuous Bake Or 12-Hour; Energy Saving Features; Changing Oven Temperature Display (F° Or C°) - Frigidaire CGEF3032KWE Use & Care Manual

Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock;
set
1. Press dock once (do not hold pad down).
2. Within 5 seconds, press and hold the A or V until
the correct time of day appears in the display.
The clock cannot be changed during any timed bake or
self-clean cycle,
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a built=in 12=Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
Changing to continuous bake setting;
1. Press and hold timer down for 5 seconds until tone is
on- off
heard, "m m hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the continuous bake setting, press timer
on. off
and hold for 5 seconds until tone is heard. "12hr" will
appear in display indicating that the control has
returned to the 12-Hour Energy Saving feature.
Changing temperature display (°F or °C)
The electronic oven control is set to display in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to display °C (Celsius) or
from °C to °F (control should not be set for Bake or
Self=clean when setting this feature)"
1. Press broit ." "appears in the display.
2. Press and hold the A until "HI" appears in the
display.
3. Press and hold broil, until °F or °C appears in the
display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
Setting a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold start After 7
time "
seconds, the control will beep once. This will block the
controls from sounding when a pad is pressed. To return
the sound, press and hold start
time again for 7 seconds until
the control beeps once.
* The OVEN indicator light on the electronic display will
turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is
cycling to maintain the selected baking temperature.
When the preheat indicator light turns OFF,your oven is
ready.