Table of Contents
Advertisement
Self-Clean or Quick Clean Cycle
For satisfactory
results, use a 2 hour Quick Clean cycle
for light soils and a 3 hour Self-Clean cycle for average
or
heavy soils.
The kitchen area should be well ventilated using an
open window, ventilation fan or exhaust hood during
the Self-Clean cycle. This will help eliminate the normal
odors associated with the Self-cleaning cycles.
To Set the Controls for a Self=Clean (3 hours) or a
Delayed Start Self=Clean (3 hours):
If you do not want to start a Delayed Self-Clean or
Quick Clean Cycle, skips steps 2 & 3.
1.
Be sure the clock shows the correct time of day.
2.
Press the START TIME pad.
3.
Press and hold the UP ARROW pad to scroll to the
time to start the delayed Self-Clean cycle. Release
the pad when the desired time is displayed.
4.
Press the CLEAN pad (for a 3 hour cycle) or the
QUICK CLEAN pad (for a 2 hour cycle). "- -"
appears in the display.
5.
Press the UP ARROW pad once.
As soon as the controls are set, the motor driven
lock will begin to close automatically and the "Door
Locked" indicator light will flash. DO NOT open the
oven door while the light is flashing (it takes about
15 seconds for the oven door to lock).
.
"CLn" will appear in the display during the Self-Clean
cycle and the "Door Locked" light will glow until the
Self-Cleaning cycle is complete or cancelled and the
oven temperature
has cooled.
When the Self=Clean Cycle is Completed:
1.
"CLn" will appear in the display and "Door Locked"
light will continue to glow.
2.
Once the oven has cooled down for about 1 HOUR
and the "Door Locked" light has gone out, the oven
door can be opened.
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
Stopping or Interrupting
a Self=Cleaning
Cycle
If it becomes necessary to stop or interrupt a Self =
Cleaning cycle:
1.
Press the CANCEL pad.
2.
Once the oven has cooled down for about 1 HOUR
and the "Door Lock" light has gone out, the oven
door can be opened.
3.
Restart the Self-Clean cycle once all conditions have
been corrected.
Your oven thermostat
has been precisely set at the factory.
This setting may differ from your previous oven, however, so
your recipe times may not give you the results you expect.
If you think that the oven is cooking too hot or cool for your
recipe times, you can adjust the thermostat so that the oven
cooks hotter or cooler than the temperature
displayed.
To Adjust Oven Temperature:
1.
Press and hold the BAKE pad for 8 seconds.
The
display now indicates the amount of degrees
offset
between
the original factory temperature
setting and
the current temperature
setting.
If the oven control
has the original factory calibration, the display will
read "0':
2.
The temperature can now be adjusted up or down
35°F or 19°C, in I°F or 1°C steps by pushing and
holding the UP or DOWN ARROW pad. Adjust until
the desired amount of degrees offset appears in the
display. When lowering the oven temperature,
a mi-
nus sign (-) will appear before the number to indicate
that the oven will be cooler by the displayed amount
of degrees.
3.
When you have made the desired adjustment,
wait 5
seconds or press CANCEL to accept the change.
The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature.
Advertisement
Table of Contents
