ELECTRONIC OVEN CONTROL
Control
Pad Functions
Read the instructions
carefully
before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one
shown. This doesn't change the way it operates.
Speed Bake Pad- Used
Speed Clean
Bake Time
to enter the speed bake
Pad- Used to
Pad- Used to
mode temperature (some
select the speed
enter the length
models),
clean cycle
of the baking
time.
Note: The oven function will not work if the time of day clock is not set.
Up and Down
arrow
pads- Used along
with
the function
pads to select oven
temperature, cooking time, start time (when
programming an automatic start time), time
of day, clean time and minute timer.
Clock Pad- Used to
set the time of day.
Interior
Light
Pad- Used to turn
oven interior light ON
and OFF.
Bake
Pad
Used to enter
the
normal
baking mode
temperature.
Broil Pad- Used
Keep Warm
to select
the
Pad- Used to
variable
broil
set the Keep
function.
Warm feature.
tree
• Oven
\
] Y
0 Preheat
_ocked
I
Pad
Start Time Pad- Used
Used to
to set the desired start
select the
time for baking. Can be
self-
used with BAKE TIME
cleaning
to program a delayed
cycle,
bake cycle.
Pad- Used to
clear
any function
previously
entered
except the time of day
/and
minute
timer.
Push Clear pad
to
stop cooking.
Timer Pad- Used to
set or cancel
the
minute
timer.
The
minute timer does not
start or stop cooking.
Oven, Preheat & Lock lights- The "oven" light indicates
that the oven is functioning. The "Preheat" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature.
The "Door Locked" light will flash until the door locks when
the self-clean cycle is in use. It glows constantly after the
door locks (some models).
The oven
can be programmed
to:
Bake normally, Speed Bake, Keep warm, Time Bake, Delay Start (delayed bake), Broil, Clean and Speed Clean.
Note: Push buttons or pads may be shaped differently.
For a silent
control
panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold START TIME pad for 7 seconds. "- -" or "SP" appears in
the display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation and silent
operation mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -"
appears, the control is in the silent operation mode.
Temperature
Conversion
(Fahrenheit
/ Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the
factory. The oven can be programmed for any temperature from 170°F to 550% (77°C to
288°C).
To change the temperature
to °C (Celsius) or from °C to °F (control should not be
in a Bake or Clean mode):
1.
Pressand hold BROIL pad for 7 seconds until °F or °C appears in the display.
2.
Pressthe UP or DOWN ARROW pad to change °F to °C or °C to °F.
3.
Wait 5 seconds to accept the changes or press CLEAR/OFF pad to accept the changes.
Versi6n
en espaffol
Si desea obtener una copia en
espahol de este Manual del
Usuario, sirvase escribir a la
direcci0n
que se incluye
a
continuaci6n.
Solicite la P/N
318204143E.
Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
Dublin, Ohio 43017-0961
318204143 (0802) Rev.A