Epson Stylus CX6600 Quick Manual page 34

Follow the steps below to replace an ink cartridge:
Caution:
Leave the empty cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other
products may cause damage to your CX6600 not covered by Epson's warranty.
1. If an ink cartridge is empty:
Look at the LCD screen to see which cartridge is empty, then press the
4> Color button.
If an ink cartridge is low:
Press the Setup button to enter Setup Mode, then press the green button next
to the LCD screen until Replace Ink is displayed. Then press the 4> Color
button.
2. Lift up the scanner
3. Wait for the ink cartridge holder to move over as shown, then open its cover.
34 Maintaining Your CX6600