Electrolux Icon E24CM75GSS Use & Care Manual page 37

Care & Cleaning
37
Decalcification for Model E24CM76GSS (Plumbed Version) with a
generic or no filter system
1. For Model E24CM76GSS to be decalcified, the water line must be in an
accessible location. The type of fittings and hoses required to connect it
depend on the type of installation.
2. Use an Electrolux ACCFILT-24 filter kit and an Electrolux ACCKITA-24
flushing cartridge.
3. When the coffee system is pulled out all the way, there is approximately a
three inch space to reach behind.
4. Turn off the water supply to the coffee system and pull it out from the cabinet.
5. Push the Hot Water button. Wait for the water to stop. Repeat this process
twice to remove air.
Hot
Water
.
,
.
.
Remove the divider insert from the
flushing cartridge with a small screw
driver.
Dissolve one packet of Puly
Decalcifying Powder in 12 ounces of
warm water. Use a measuring cup.
Fill the flushing cartridge with solution
and top it off with water. Reinstall the
divider insert.
Install the flushing cartridge into the
filter head. Keep it upright so no water
runs out.
10. Disconnect the far end of the water
hose that connects to the coffee
maker from the water supply.
11. Connect the hose to the filter head
outlet (see the arrow on the head)
12. Connect the house water supply to
the inlet on the filter head.
13. Turn on the water supply.