Adjusting Oven Temperature (Upc) - Electrolux EW3LDF65GBA Use & Care Manual

Setting Your Preferences
Adjusting oven temperature Adjusting lower oven
User programmable offset (UPO)
temperature(UPO)
Your appliance has been factory calibrated and
tested to ensure an accurate baking temperature.
For the first few uses, follow your recipe times and
temperature recommendations carefully.
If you feel your oven is too hot or too cool from
your baking experience, the oven temperature may
be adjusted to your liking. The temperature may be
increased up to +35°F (+19°C) or decreased down
to -35°F (-19°C) from normal.
See the example below to decrease the
temperature in the upper oven.
1. Press and continue to press
USER PREF until you reach
the pre-set UPO mode
-Fig, l,
2. Press -Io to adjust the
tern perature lower.
3. Use -Io to advance to -10
-Fig. 2.
|O
|O
The temperature may be increased +35°F (+19°C)
or decreased -35°F (- 19°C) from normal.
See the example below to increase the
temperature in the lower oven.
Step Press
1. Press and continue to press
USER PREF until you reach
the pre-set UPO mode.
-Fig, l-
2. Press +hi to adjust the
temperature higher. -Fig. 2-
3. Use +hi to advance to 10.
-Fig. 2-
4. Press START/enter to accept
or press CANCEL/off to
reject.
To set the temperature lower
use the Io- key.
+
hi
+
hi
4>
4. Press START/enter to accept
or press CANCEL/off to
reject.
To set the tern perature
higher use the hi+ key.
D Ft p
u, u , u
....... . ............................ ................................. Fig. 1
Fig. 2
¢>
Fig. 1