How to Adjust
Buttonhole
Stitch Balance
Use the stitch length control O to adjust stitch density.
Turn the dial in direction
@ for a coarser
density
(_).
Turn the dial in direction
(_ for a tighter density
_).
NGTH
If the sides of the buttonhole
are not balanced,
do
the following;
--
If the buttonhole
looks like _), move the lever
with the screw
driver to the right ( + ) to make the
right side of the buttonhole
less dense
(see illustration).
--
If the buttonhole
looks like (_), move the lever
with the screw driver to the left ( - ) to make the
right side of the buttonhole
denser.
(_ Buttonhole pitch balance adjusting lever
78