Extension Cords - Delta ShopMaster MS350 Instruction Manual

10" compound power miter saw
Table of Contents

Advertisement

EXTENSION CORDS
Use proper
extension
cords.
Make sure your extension
cord is in good condition
and is a 3-wire
extension
cord which
has a 3-prong
grounding
type
plug and matching
receptacle
which
wiii accept
the machine's
plug.
When
using
an
extension
cord,
be sure to use one heavy enough
to carry the current
of the machine.
An undersized
cord
will cause
a drop in line voltage,
resulting
in loss of power and overheating.
Fig. C shows
the correct
gauge
to use depending
on
the cord length.
If in doubt,
use the next heavier
gauge.
The smaller
the gauge
number,
the heavier
the cord.
MINmMUM
GAUGE
EXTENSmON
CORD
RECOMMENDED
SIZES FOR USE WiTH STA31ONARY ELECTRI© MACHINES
Ampere
Total Length
Rating
Volts
of Cord in Feet
0=6
i 20
up to 25
0=6
120
25-50
0=6
i20
50-100
0=6
i20
100-150
6=10
120
up to 25
6=10
120
25-50
6=i0
i20
50-i00
6=i0
i20
i00=i50
i0=12
i20
up to 25
i0=12
i20
25=50
I0=12
i20
50=I00
i0=i2
i20
i00=i50
i2=i6
i20
up to 25
i2=i6
i20
25=50
i2=i6
i20
Gauge of
Extension Cord
i8 AWG
i6 AWG
i6 AWG
i4 AWG
i8 AWG
16 AWG
i4 AWG
i2 AWG
i6 AWG
i6 AWG
i4 AWG
i2 AWG
i4 AWG
i2 AWG
GREATER
THAN
50 FEET NOT
RECOMMENDED
Fig. C
NG INSTR
Delta Model MS350 is a 10" Compound
Power Miter Saw designed to cut wood, plastic, and aluminum. Compound
angle and bevel cutting are easy and accurate. It can crosscut up to 5-3/4" x 2-3/8"at the 90 degree position, miter at
45 degrees, both left and right 4-1/8" x 2-3/8", bevel at 45 degrees left 5-1/2" x 1-9/16", and compound 45 x 45 degrees
4-1/8" x 1-9/16". It has positive miter stops at 0, 22.5, 31.62, and 45 degrees both ieft and right, and bevel stops at 0
and 45 degrees adjustable.
UNPACKING
AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents