Advertisement
READ
TH E INSTRUCTIONS CAREFU LLY BEFORE USING TH E OVEN, For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
CLOCK
BAKE TIME
PAD--
Used
PAD--
Used to
to set the
enter the length of
time of da_.
the bakin( time.
X
SPEED CLEAN
(SELF-CLEAN)
--
Used to select a
shorter 2 hour Self-
_
/®_ _
•
c o c cot o
UP and DOWN ARROW PADS--
Used along
with the function
pads to select oven
temperature,
cook time, start time (when
programming
an automatic start time), time of
day, clean
timer.
BAKE PAD--Used
to select the bake
function.
FEATURE INDICATOR
UGHTS--
These light to
show which feature is in
use.
®
BROIL PAD--
Used to
_
select the variable
broil
function.
SELF-CLEAN
PAD--
Q
•
•
•
Oven
Used
to select
alonger
:
• P,e,ea,
hour self-oloan
- 0o°
OVEN, PREHEAT
& DOOR LOCKED LIGHTS*--
The "OVEN"
light
will glow each time the oven turns on to maintain
the set oven
temperature.
The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature
is reset higher than the
actual oven temperature.
The "DOOR
LOCKED"
light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
TIMER ON/OFF PAD--
START TIME
Used to set or cancel the
PAD--
Used to set
minute timer. The minute
the desired start
timer does not start or stop
time for baking &
cooking. Also,
Self-Clean.
May be
TIMER ON/OFF pad is used used with BAKE
to set the Continuous
Bake
TIME to program a
feature,
delayed
bake cycle.
OVEN LIGHT PAD--
Used to turn the interior
oven light ON or OFF.
CLEAR/OFF
PAD--
Used
to clear any function
previously
entered
except the time of day
and minute timer. Press
CLEAR/OFF
to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven lockout
setting.
*N0te: The OVEN indicator light o n the electr0nic disp!ay wi!! turn ON and OFF When using the Bake feature and during
preheat. This is normal and indicates that the oven is cyc ing to manta n the se ected bak ng temperature. When the
preheat indicator light turns OFF, your oven is ready.
For a silent
control
panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold @.
After 7 seconds, the control will beep once. This will block the controls from sounding
when a pad is pressed. To return the sound, press and hold @
again for 7 seconds until the control beeps once.
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
should
not be in a Bake or Clean mode):
1.
Press _.
"
"appears
in the display.
2.
Press and hold the /_
until "HI" appears in the display.
3.
Press and hold _
until °F or °C appears in the display.
4.
Press the ,/_
or V
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
Advertisement
