Advertisement
Available languages
Available languages
Attach
Cabinet
Door Stop
[]
Attach
the Cabinet
Door Stop to the front of cabinet
bottom
using 2 Phillips
Head Bolts
(IVl4x8mm).
Phillips Head Bolt M4x8mm
Qty: 2
Cabinet Door Stop
Qty: 1
Attach
Firebox
to Cabinet
[]
With the aid of an assistant,
place the Firebox onto the Cabinet
Frame with Regulator
Hose and
Side Burner Ignition
Wire hanging
inside of Cabinet.
Note: Rear of Firebox rests on two tabs at
back of Cabinet.
[]
Line up the holes and attach the Firebox to the Cabinet
Frame using 4 Phillips
Head Bolts (lV16x16mm)
and 4 Plastic Washers
(IV16).
Hint:
You may need to slide the Firebox Assembly
forward,
backward,
or lift slightly
for the bolt
holes to properly
line up.
Push the 5 Control
Knobs onto Valve Stems.
See Inset
1.
[]
Phillips Head Bolt IV16x16mm
qty: 4
Plastic Washer IV16
qty: 4
Inset
1
10
Advertisement
