Advertisement
Understanding Howthe "ARR0W-LOC" CamFastener Works.
ARROW
TOWARDS
HOLEIN
EDGE
1. Position
bolt in
2. Press cam into
3. Insert bolt through
pre-drilled
hole and
pre-drilled
hole until
pre-drilled
hole in
turn until tight,
flush
with surface,
edge of panel.
4. To lock, rotate cam
until tight, using
allen key provided.
Cabinet Assembly
Step 1.
Place Top, Partition and Left and Right Sides on a flat protected surface (to prevent
scratching of parts) and thread connecting bolts (25 total) into pre-drilled holes (as shown in
FIG. 1), Turn Partition over and thread in the remaining bolts as indicated below (FIG. 1A).
¢
Right Leaf
l NOTE:
!
• = Connecting Bolt
Top Assembly
Left Leaf
FIG. 1
Right Side Panel
FIG. 1A
el
Left Side Panel
•
•
•
•
0
°
J J
Partition
Partition
(viewed form right)
(viewed form left)
Page 3
98300-3
98301-3
98302-3
Advertisement
