Advertisement
Step 13. Attach the (2) Leaf Support Wings to outside of Right and Left Sides, on right and one
Left with (8) #8 x 5/8" Flathead Screws. Now, attach the (2) Bronze Strike Washers for the
Round Magnet to each side with (2) #5 x 1/2" Flathead Screws (as shown in FIG. 13).
FIG. 13
Right Wing
Left Wing
ignet
#8x5/8"
Flathead Screw
NOTE:
Support Wings are to fold
toward rear of cabinet.
Step 14. With an assistant, grasp the Top and Leaves together (top assembly)
and turn the Top over and
guide the Connecting
Bolts into the corresponding
holes in the Sides and Partition (as shown
FiG. 14). Turn the Cams to the locking position. Some adjustment
in the location of the Platform
can be made so as to permit Freearm position (see page 15). Just loosen the Screws holding the
Platform to the Wings; align and retighten.
Front View
FIG. 14
Top Assembly
Page 12
98300-1:
98301-12
98302-12
Advertisement
