Table of Contents
Advertisement
Setting
Oven Controls
(cont'd)
Setting
the Warm & Hold
TM
Feature
The
pad turns ON the Serve Warm & Hold feature and will maintain an oven temperature of t 70 ° F (77°C). The
Warm & Hold feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours
the Warm & Hold feature will shut the oven OFF automatically. The Warm & Hold feature may be used without any other
cooking operations or can be used after cooking has finished using TIMED BAKE or DELAY START BAKE.
To set Warm & Hold:
1.
Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.
2.
Press
....
will appear in the display and the Warm & Hold indicator light above the pad will turn ON.
Note: If no further pads are touched within 6 seconds the request to turn ON Warm & Hold will be cleared.
3.
Press A
or V
to start.
4.
To turn Warm & Hold OFF at any time press _'_.
The Warm & Hold indicator light above the pad will turn OFF.
_J
To set Warm
& Hold
to turn
ON automatically:
1.
Arrange interior oven racks and place food in oven. Set the oven properly for Timed Bake or Delay Start Bake.
2.
Press
....
will appear
in the display
and the Warm
& Hold indicator
light above the pad will turn ON.
3.
To turn Warm
& Hold OFF at any time press _.
The Warm
& Hold indicator
light above the pad will turn OFF.
Adjusting the Oven Temperature
Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your
recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your
recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.
To Adjust Oven Temperature:
1.
Press
_.
2.
Set the temperature to 550°F (287°C) by pressing and holding the j%.
3.
Within 2 seconds, press and hold t
until the 2 digit display appears. Release
The display now indicates the
amount of degrees offset between the original factory temperature setting and the current temperature setting. If the
oven control has the original factory calibration, the display will read "0."
4.
The temperature can now be adjusted up or down 35°F or t 9°C, in 5°F or 1°C steps by pressing and holding the j_,
or V.
Adjust until the desired amount of offset appears in the display. When lowering the oven temperature, a
minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of
degrees.
5.
When you have made the desired adjustment, press _
to go back to the time of day display.
Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.
19
Advertisement
Table of Contents
