Advertisement
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
HANDLE MOUNTED
Ha
Release
Pedal
To start the vacuum cleaner, slide the
On/Off switch from the OFF position to the
ON position_ To stop the vacuum cleaner,
slide the On/Off switch to the OFF position.
Crevice
TooI.._,,,,.,,,_
Telescoping
Wand __._
Dusting
Brush
Combination
Brush
J
Identify each of the attachments
shown
above.
TO USE ATTACHMENTS
Place the carpet/bare
floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting°
See CARPET/BARE
FLOOR SELECTOR
section.
When returning the bare floor selector to
the carpet setting, use caution as the selec-
tor can move quickly to that setting due to
tension created by the belt.
Remove the lower end of the stretch hose
from the cleaner by grasping the hose col-
lar, twisting and pulling straight out. The
attachments
can now be added to the hose.
NOTE: The motor protector
may open
when
using attachments
or when cleaning
new carpet,
due to reduced
airflow by the
attachments
themselves
or by new carpet
fuzz filling the dust bin quickly.
See the
TROUBLESHOOTING
section.
Electrical Shock And Personal Injury
Hazard
Disconnect
electrical supply
before
servicing
or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal
injury from
cleaner suddenly
starting.
ii i iiiiiiii
Advertisement
