Advertisement
F
, wARNING
..............
Electrical
Shock Or Personal
Injury
Hazard
Disconnect
electrical
supply before
servicing
or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal
injury from
cleaner
suddenly
starting.
i
ll,i
iHllll,,,ll
Frequently
check and remove hair, string
and tint build-up in the brush area_ If build-
up becomes
excessive,
follow the steps
below.
TO REMOVE BELT
Disconnect
power cord from electrical
out-
let.
Carpet/Bare
Floor Selector
Place the
carpet/bare
floor selec-
tor in the
carpet posi-
_ To Carpet
tion and
Position
lower han-
dle to tay
_,
vacuum flat.
Latches
Slide latches
outward and
remove noz-
Nozzk
zle cover.
Cover
Agitator
Cover
Furniture
Guard
Retainer
Unfasten the
furniture
guard retain-
ers from the
posts on both
sides of the
agitator
cover,
Depress
tabs on
rear of agitator
cover and rotate
forward to
release from the
nozzle body
The light bulb socket assembly
does not
have to be removed.
Lay the agitator cover
over to the side out of the way.
Belt
Spare
Belt
Position hands on the agitator. If the belt is
still attached
to the agitator, there will be
tension on the agitator. Carefully
lift the right
end of the agitator and then the left end°
NOTE: It may be necessary
to pull the edge
of the furniture
guard out of the way to allow
the ends of the agitator to be removed easily
Remove the belt from the motor drive shaft.
A spare belt is provided.
See above illustra-
tion for location of spare belt. You may keep
a spare belt in this location any time.
WARNING
Personal
Injury Hazard
Be careful when removing
the agita-
tor as the belt tension
is high.
Failure to do so could result in per-
sonal injury from the agitator releas-
ing quickly and snapping
away.
18
Advertisement
