Advertisement
TO STORE ATTACHMENTS
Remove dusting
brush or combination
brush, Snap into appropriate
storage Ioca-
tiono
Remove crevice
tool from the wand by twist-
ing_ Lay aside°
Remove the extension
wand from the hose.
Twist the wand to the left and pull it away
from the hose en&
Upper
Wand
Unlock the wand by turning the wand lock-
ing ring to the UNLOCK position,
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com-
pressed
wand° Snap into the appropriate
storage
location.
Reinsert
the hose fully into the opening
on
the nozzle base from which it was removed,
Press firmly to assure connection.
DO NOT pull the vacuum
cleaner
around the room by the hose.
Property
damage
could result.
I I
III
II JJ!llUIUI
EXTENSION
HOSE
SOME
MODELS
Some models include an extra hose which
connects
to the stretch hose on the vacuum
for a longer cleaning
reach.
Unit Hose
_
Extension
Hose
Insert the two tabs on the end of the
extension
hose into the two "J" shaped slots
on the unit hose and twist to connect,,
At! attachments
and the telescoping
wand
can be attached to the open end of the
hose_
FLOOR BRUSH AND WAND
SOME
MODELS
Some models have an extra brush and wand
for cleaning
bare floors,. Twist one end of the
adaptor
into the floor brush and the other
end into the straight wan&
Connect
the
straight
wand to the telescopic
wand and
then to the vacuum
hose or extension
hose.
Floor
Brush
-----_
0_
_____J
Wand -_
Adaptor
_
When using the regular
hose or with
the extension
hose attached,
the
cleaner
should be on a solid surface
on the same level or below the level
of the user's feet. DO NOT use the
hoses when the cleaner
is above the
level of the user's feet.
I IIIjlll
10
Advertisement
