Advertisement
TO REPLACE
DUST BIN:
Turn This Direction
Open
To Close For Use
(For Emptying)
Closed
(For Use)
Replace dust bin lid assembly
by placing
back on dust bin with the marks on the lid
aligned as shown under Open (For
Emptying)
on the back of the dust bin.
Rotate lid clockwise
while pressing
down-
ward so marks align as shown above Close
(For Use) as above.
Check secondary filter frequently and clean
when dirty.
,.. / __7
Place dust bin
"'="
"-
"_=__'__-_
back into vacuum
cleaner
by insert-
ing the bottom first
and tilt back with
the dust bin han-
dle raised.
Dust Bin
Release
Handle
--
Dust
Bin--
Lower the dust
bin handle to lock
dust bin in place_
Electrical Shock Hazard
Do not operate the cleaner without
the motor safety filter. Be sure the
filter is properly installed to prevent
motor failure and/or electrical
shock.
Always unplug power cord from
electrical
outlet before performing
any service
on vacuum.
i
iii i iii
II
I
SECONDARY FILTER
FOAM
Remove the dust bin as outlined in the
DUST BiN CLEANING section.
Remove secondary
filter from vacuum
cleaner.
Secondary
I
Filter
Wash the secondary filter in warm soapy
water, rinse and dry thoroughly by squeez-
ing the filter in your hand and letting it air
dry,
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace dry secondary
filter. Ensure filter is
properly installed over filter opening.
Replace the dust bin as outined in the
DUST BiN CLEANING
section°
16
Advertisement
