Table of Contents
Advertisement
Consumer Defined Control Features
FEATURE
OVERVIEW
•
Oven Lockout (Electric Range)
•
Temperature Display
Note: The Consumer Defined Control features are adjustments to the
control that will not affect cooking results. These include the Oven
Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout
Feature
The LOCK _
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the Warmer Drawer from being turned on. It does not disable the clock, Kitchen Timer, Warmer Zone or the interior
oven light.
INSTRUCTIONS
PRESS
DISPLAY
To activate the Oven Lockout feature:
1.
Press and hold [_
for three seconds (Fig. 1).
2.
After 3 seconds the lock icon light ( _
) will appear, a beep will
sound and "DOOR LOCKED" will flash in the display. Once the
oven door is locked the "DOOR LOCKED" indicator will stop
flashing and remain on along with the lock icon light.
To reactivate
normal
oven operation:
1.
Press and hold _
for three seconds. A beep will sound.
The "DOOR LOCKED" will continue to flash until the oven door
has completely unlocked and the lock icon light ( _
) will clear
(See Fig. 2).
2.
The range is again fully operational.
[_for
3 seconds
[_for
3 seconds
Setting Temperature
Display m Fahrenheit
or Celsius
The BROIL
and CLEAN O
pads controlthe Fahrenheit orCelsius temperature
display modes. The oven control can be programmed
to display temperatures in
Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
Figure 1
Figure 2
r
INSTRUCTIONS
To change display
from
Fahrenheit
to Celsius
or
Celsius
to Fahrenheit:
PRESS
DISPLAY
1.
To tell if the display is set for Fahrenheit or Celsius press and
hold the
pad. "BROIL", "550 °'' will appear in the display
(See Fig. 3) and continue to HOLD for 7 seconds. A beep will
then sound.
If "F" appears, the display is set to show
temperatures in Fahrenheit (Fig. 4). If "C" appears, the display
is set to show temperatures in Celsius (Fig. 5).
2.
Press
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3.
Press O
to accept the change or press _
to reject the
change.
15
for 7seconds
Figure 3
Figure 4
Figure 5
Advertisement
Table of Contents
