Table of Contents
Advertisement
CLEANING
T P$
On the following pages, all removable
parts on your
range are shown. Refer to those pages when cleaning
your range.
Warm water, a mild detergent and a soft cloth are safe to
use on all cleanable parts of your range.
Do not use metal scouring pads, except
where recom-
mended.
PART
Control panel knobs
CLEANaNG
UATERIIALS
REMARKS
Detergent, warm water, soft
.............. D0 not use abrasive cleaners. Knobs pull off for
cloth
easier cleaning.
......
, ,,,,,,,,,,,,,,,
Scouring powder, Heavy Duty
The red dot In the center of the element c_.n be
Scotch Brite Scour Pad® or
removed with a soap-filled steel wool pa_
The
soap pad, Collo Electrol®
dot is used by the element manufactt
to
identify the element as having a special safety
feature.
The red dot will wear off, but this will
not affect the performance
or durability of the
element.
Follow the circular grooves of the elemen
cleaning.
Light Spills--Wipe
the element with a powdered
cleaner and a damp cloth.
Heavy Spills--Scrub
with a scou ring pad and/or
scouring powder.
Stains--Heavy
stains can be removed with 80-
100 grit sand paper.
After cleaning, wipe element with a dam )cioth
and tL,rn element on a medium setting t_ dry.
Finish with vegetable oil or Cotto Electrol®:
Heat element on Medium for 30 second_, then
turn it off. Apply a small amount of salt-free
vegetable oil to a dry cloth or paper to_
and
rub a light coating into the element surface to
improve the appearance of the element and to
prevent the element from rusting. Rub c onto
the element evenly and wipe off excess
Heat
element for one minute on Medium to cure.
The matte black surface can be maintai
by
treating it periodically with the Collo Electroi®
polish. The solid element dressing is available
through Sears Stores or Sears Service Centers.
To use the polish, use the applicator to pply a
very thin coating to the entire element s _rface.
Turn the element on high for several mln
to
bake the polish to the element.
When the ele-
ment is cool, rub lightly with a cloth o= paper
towel to remove any excess polish. The dress-
ing restores the color of the element and helps
prevent the element from staining. The element
must be clean before the dressing is applied.
NOTE:
This product is not a cleanser
it is a
cosmetic polish.
15
NECCH32
Advertisement
Table of Contents
