Kenmore 116.38099 Owner's Manual page 16

WA _ N'_ N G ....... r ...............
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
Disconnect electrical supply.
To access the light bulb, remove the screw
which secures the light lens to the vacuum.
Remove the lens.
Screw Light Lens Push Here
To Remove
Remove the light bulb by pushing the bulb in
whiEe turning counterclockwise to release
from the slot. Pull the light bulb straight ouL
To Release
• CAUTION ...........................
Do not use a bulb rated over 15 W
(130V). During extended use, heat
from the bulb could overheat sur-
rounding plastic parts.
To Replace
To replace the light bulb, carefully insert and
turn clockwise to fit securely into slot.
Note: See Parts and Features for for bulb
ordering number°
• cAu'TIoN ...................
Do not plug in or turn on until com-
pletely reassembled.
Position the light lens back on the vacuum.
Replace the light lens screw°
16