Automatic Ice Maker (Some Models) - Kenmore 253.78296895 Owner's Manual

Care and Cleaning
(continued)
the refrigerator control to OFF and disconnect the power tf the unit has an automatic
ice maker, turn off the ice maker and turn the water supply valve to the closed position
Defrost and clean the interior thoroughly Leave both doors open to prevent odor and
mold buildup Block open if necessary
When moving the refrigerator, follow these guidelines to prevent damage:
• Remove all food and other items from both the refrigerator and freezer
compartments Empty the ice storage bin Defrost and clean the interior
thoroughly
• If a hand truck is used in moving, toad the refrigerator from the side
• Turn front rollers as far up as possible This will protect them during sliding
or moving.
The cabinet should be well padded and handled with care DO NOT DROP.
Automatic Ice Maker
tf your refrigerator has an automatic ice maker, it will provide a continuous supply of
ice for normal use The automatic ice maker is an optional accessory which may be
installed in most models at any time Call your local dealer for installation
Signal Arm
After the plumbing connections have been completed, the water supply valve must
be opened Place the ice container under the ice maker, pushing it as far back as
possible Lower the wire signal arm to its "down" or ON position Because of new
plumbing connections, the first production of ice cubes may be discolored or have an
odd flavor. Throw the ice away until the cubes made are free of discoloration and
taste _ Remember that water quality determines your ice quality It is best
to connect the ice maker to water that is not soft Softening chemicals can damage
the ice maker tf the ice maker is connected to soft water, ensure the softener is
maintained and working properly
To stop the ice maker, lift the wire signal arm until it clicks and locks in the "up"
or OFFposition The ice maker turns off automatically when the ice container is full
If your model has an adjustable freezer shelf, place the shelf so the wire signal arm
will hit the ice when the ice container is full
Ice Maker Tips
1 ice stored too tong may develop an odd flavor Empty the container and be sure the
wire signal arm is in its "down" or ON position The ice maker will then produce
more ice
2 Occasionally shake the container to keep ice separated
3 Keep the wire signal arm in its "up" or OFF position until the refrigerator is
connected to the water supply or whenever water supply is turned off
4 Certain sounds are normal when the ice maker' is operating° They are:
Motor operation
Ice being loosened from the tray
Ice being dropped into the container
Running water
Water valve opening and closing
For more information on these operations, see "Normal Operating Sounds "
5 Wash ice container in warm water with mild detergent Rinse well and dry
8