Before Setting Oven Controls - Frigidaire MEF352BGWE Owner's Manual

Electric range coil surface elements self-cleaning oven models
Table of Contents

Advertisement

Before Setting
Oven
Controls
Oven
Vent
Location
The oven is vented under the left rear surface element. When the oven is on,
warm air is released through the vents. This venting is necessary for proper air
circulation in the oven and good baking results.
Arranging
Oven
Racks
(Some models may have one rack.) ALWAYSARRANGE OVEN RACKS WHEN THE
OVEN IS COOL (PRIORTO OPERATING THE OVEN). Always use oven mitts when
using the oven.
REMOVING &
REPLACING OVEN RACKS
To remove, pull the rack forward until
it stops. Lift up front of rack and slide
out. To replace, fit the rack onto the
guides on the oven walls. Tiltthe front of
the rack upward and slide the rack back
into place.
ARRANGING OVEN RACKS WITH
5 RACK POSITIONS
To bake on one rack, place the rack on
_osition 3 or 4. To bake on two racks
(some models), place the racks on po-
sitions 2 and 4.
Position
Position
Position
-4th
Rack Position
Position

Advertisement

Table of Contents
loading

Table of Contents