Frigidaire FPDF4085KFA Use & Care Manual page 10

Placement of Burner Bases and Caps
Your Cooktop isequipped with three different sizes of burners:
Power Burner, Standard Burner and Simmer Burner.
Place the burner base over each gas opening, matching
the burner base size with the gas opening size. Place the
burner cap on each burner base, again matching the cap
size to the burner base size. The cap for each burner has
an inner locating ring which locates the burner cap in the
center of the burner.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the
burner does not light, contact a Service Center. Do not
service the sealed burner yourself.
Placement of Burner Grates
Place grate over burner pans. Make sure that the groove
under grate fits over the raised lip of the burner pan. The
rounded corners of the grates should be placed toward the
front of the cooktop for the front burners and the rear of
the cooktop for the back burners.
Grate
Burner Cap
Burner Pan
\
J
/
/
Burner pan
lip
P
Surface
Burner
Base Gas
Electrode