Table of Contents
Advertisement
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,
such as your dealer, for service.
Symptom
No sound is heard.
Unable
to record on a CD-R or CD-
RW.
Poor radio reception.
Unable to operate the remote control.
Loaded discs cannot be ejected.
The disc does not play.
The disc play- skips.
Operations are disabled.
PossibleCause
Action
•
Connections are incorrect, or loose.
•
Check all connections and make
corrections. (See pages 8 - 11 .)
•
CD-ROM is loaded.
•
Replace the disc.
•
CD-R or CD-RW has been loaded
•
Insert the disc correctly.
upside down. ("NO DISC" appears
on the display.)
Finalized CD-R or CD-RW has
•
been loaded.
Disc is dirty- or scratched.
CD-R: Replace the disc.
CD-RW: Unfinalize the CD-RW
(see page 43).
Clean or replace the disc
(see page 50).
Reconnect the antenna securely.
•
The antenna is not connected
correctly.
•
The AM loop antenna is too close
•
Change the position and direction of
to the unit.
the AM loop antenna.
•
The FM antenna is not properly-
•
Extend FM antenna to the best
extended and positioned,
reception position.
•
The path between the remote
•
Remove the obstruction.
control and the remote sensor on
the unit is blocked.
•
The batteries have lost their charge.
•
Replace the batteries. (See page 12.)
•
The main AC power cord is not
•
Plug in the AC power plug.
plugged in.
•
Disc Lock is in use.
•
Turn offDisc Lock. (See page 25.)
The disc is upside down.
Put the disc in with the label side up.
The disc is dirty- or scratched.
Clean or replace the disc. (See page 50.)
The built-in microprocessor
has
Unplug the unit then plug it back in.
malfunctioned
due to external electrical
interference.
IMPORTANT
• If you are going to record something important, always test-record
first to check that the recording turns out properly before
proceeding with the actual recording.
° The manufacturer
assumes no liability whatsoever for any damage resulting from missed opportunity
or accidental
erasure
that occurs while conducting recording or playback operations due to malfunctioning
of or trouble in the unit, or for any
incidental damage.
- 53 -
Advertisement
Table of Contents
