Before Setting Oven Controls - Frigidaire FEF368CJSD Owner's Manual

Before Setting Oven
Controls
Oven Vent Location
For models equipped with coil surface elements, the oven vent is located under
the left rear surface element. For models equipped with a ceramic-glass cook
top the oven vent is located below the backguard. When the oven is on, warm
air is released through the vents. This venting is necessary for proper air
circulation in the oven and good baking results.
OVENVENT
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
REMOVING & REPLACING OVEN RACKS
To remove, pull the rack forward until it stops. Lift up front of rack and slide
out. To replace, fit the rack onto the guides on the oven walls. Tilt the front
of the rack upward and slide the rack back into place.
ARRANGING OVEN RACKS WITH 5 RACK POSITIONS
To bake on 1 rack, place the rack on position 3 or 4. To bake on 2 racks, place
the racks on positions 2 and 4. Convection ranges are equipped with 3 racks
and should be placed in positions 1, 3 and 4.
Rack Position
-2nd Rack Position
Rack Position
Rack Position
Rack Position
9