Advertisement
If the MULTI PICTURE button on the remote control is
pressed, multi pictures will display. And then three types
of the screen can be selected by pressing the MULTI
MODE button on the remote control.
The multi picture mode will change in the following
sequence each time the MULTI MODE button is pressed.
2 pictures
(Split) _
4 pictures --€_ 12 pK:tures I
RECALL
button
SELECT
buttons
"--E
PROGRAM UP/DOWN "--I'--
buttons
©®@
®@@
©@@
OO
0"'_
-- MULTI PICTURE
button
MULTI MODE
button
A/B button
I Activating
the Split mode from the TV screen
I
Pressing
the MULTI PICTURE button one time will display
2 pictures.
• The speaker icon can be shifted left and right by pressing the A/B button; the audio will be output from the
side on which the speaker icon is located.
• The same signal input cannot be selected for both screens at the same time.
• The TV channel can be changed by pressing the _._ and _
PROGRAM UP/DOWN buttons on the remote
control.
• The signal input mode of picture-A or picture-B (the one that the speaker icon is located on) can be selected
by pressing INPUT SELECT button on the remote control.
• Pressing the MULTI PICTURE button once again will cancel the multi picture mode.
• When the Video input is set to RGB Video, multi picture mode is not possible.
• Refer to the table for 2 pictures (S@t) mode. [4_43
I Activating
the 4
mode from the TV
]
pictures
screen
Pressing
the MULTI MODE button one time at the 2 pictures
mode will display 4 pictures.
• Press [A/B] button to select picture A or picture B indicated by a red triangle. For pictures on right press
A V SELECT buttons to select picture. The selected channel number would change green.
• The TV channel can be changed by pressing the (_ and _
PROGRAM UP/DOWN buttons on the remote
control.
• The audio can only be output from picture A in 4 pictures mode.
• The same signal input mode cannot be selected Foreach screens at the same time.
• Pressing the MULTI PICTURE button at the 4 picture mode will cancel the multi picture mode. And then,
pressing the MULTI PICTUREbutton again will display the 4 pictures.
• Refer to the table for 4 pictures mode.[_4_4_
I Activating
the 12
mode from the TV
]
pictures
screen
Pressing
the MULTI MODE button one time at the 4 pictures
mode will display 12 pictures.
• Starting from channel 1, preset channels will automatically display in sequence on the 12 windows.
• This function activates only in TV mode.
• After several seconds, it refreshes the picture one by one.
• Pressing the MULTI PICTURE button at the 12 picture mode will cancel the multi picture mode. And then,
pressing the MULTI PICTURE button again will display the 12 pictures again.
• Pressing the MULTI MODE button at the 12 picture mode will display the 2 pictures (Split) mode.
A
B
V
AV1
B1
8
A
B2
6
B3
11
1
2
3
4
5
6
7
8
9
10
11
12
NO'rl_
not change
to
Even if the input of the horizontal
/ vertical
synchronizing
signal (or video
signal)
stops in the multi picture
display,
the mode will
I
power save mode.
I• Please be careful
since image
retention
will occur
if display
is left in a multi picture
display
state for a long period
of time.
43
¢0
Z
UJ
Advertisement
