Advertisement
INPUT
SELECT
button
• Input can be switched
by pressing the AV1, AV2, AV3,
AV4, RGB1 or RGB2 buttons of the remote control, And
the way to return to a TV channel
is as follows:
• Pressing INPUT SELECT button at RGB2 input screen.
• Pressing some PROGRAM SELECT buttons and select a TV
channel.
• Pressing PROGRAM UP/DOWN buttons at the screen without
OSD(On-screen display).
• Input can be switched in the sequence of TV -_ AV1 -_
AV2 _ AV3 --> AV4 _ RGB1 _ RGB2 by pressing the
INPUT SELECT button of the monitor or the remote
control.
--
ZOOM button
RGB/VIDEO
buttons
Each time the ZOOM button of the remote control is
pressed, the screen display size will change in sequence
and the status will be displayed at the bottom of the
screen.
• During
VIDEO
signal
input
(AV1,
AV2,
AV3,
AV4,
RGB1
(set
to
[DVI-STB])
and
RGB2
(set
to
[Component]))
Full _
Cinema
_--
• The size will fix as Full mode and not change
when receiving
the
component
signal
of 1080i/50,
10801/60 or 720p/60.
Full
Display
size
selection
diagram
When you want to
Play a 4:3 image
in a 16:9 screen
faithfully
Play a 4:3 image
in a 16:9 screen
with the
height
and width
of the middle
of the
screen
enlarged
on equal
scales
and with
both
sides
appearing
somewhat
enlarged
Set the display size
4:3
Panoramic
Input signal
Display screen
Remarks
Blanking
occurs
on both
sides
(4:3
signal)
• The 4:3 image
is called
a letterbox
Play a 16:9 VISTA size image
in the 4:3
image.
image
faithfully
reproduced
on the 16:9
Zoom
• In some cases,
some
slight
blanking
may
screen
(Vista)
remain
at the top and bottom.
Play a 21:9
Cinema
size image
in the 4:3
In some
cases,
some
slight
blanking
may
image
expanded
vertically
on the 16:9
Cinema
remain
at the top and
bottom.
screen
(Oinema)
Play a 4:3 image
faithfully
in a 16:9 screen
An image
with an aspect
ratio of 16:9
in the standard
vertical
size and
Full
shrunk
horizontally
to 4:3 to display
in a
horizontally
squeezed*
(Squeeze)
4:3 screen
32
Advertisement
