Rear Panel Jacks - Hitachi 55FX20B Operating Manual

REAR PANEL JACKS
r
©
REAR SPEAKER ,J
ANT A
8Q ONLY
TC_NVERTER
O
MATRIX
SURROUND ANT B
0
S-VIDEO
(_ Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B.
ANT A input can be displayed as a Main Picture or Sub-Picture. ANT B can onlybe displayed as a Main Picture.
(ANT B cannot be displayed as a PIP sub-picture.) The antenna output labeled "TO CONVERTER" allows the
ANT A connection to pass directlyto a differentsource such as a cable box.
Q Audio/Video Inputs 1,2
The "INPUT" button will Step through each video source and antenna source input each time it is pressed. Use
the audio and video inputs to connect external devices, such as VCR's, camcorders, laser disc players, etc. (If
you have mono sound, insert the audio cable into the left channel jack.)
(_) Monitor Out
These jacks provide fixed audio and video signals which are used for recording.
_ Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo system amplifier. With this connection, the audio
to the stereo can be controlled by the televisionsmain volume.
(_) Transmitter Out
These jacks provide variable audio outputto a set of wireless speakers. They can also be used for another stereo
system amplifier. With this connection, the audio can be controlledby the televisions remote control.
(_) Rear Speaker Terminals
These terminals are used to connect external speakers, which are used for the surround sound feature. The vol-
ume level is controlledby the remote control main volume buttons. Use speakers with 8 Ohm impedance only.
Q S-Video
Input I provides S-Video (Super Video) jacks for connectingequipment with S-Video output capability.
(_ Speaker Matrix Surround Switch
Use this switch to choose between the surround and external speaker features. See page 13 for Audio System
Setup. The TV's Internal Speakers will be switched offwhen "EXT." is selected.
10