Table of Contents
Advertisement
PICTURE-IN-PICTURE
(PIP)
PICTURE-IN-PICTURE
CONT.
MULTI CH PIP
Press the "PIP" button a second time to begin Multi-Channel PIP. This feature will automatically scan throughall
active channels (those set in memory) and displaythem as PIP sub-pictures,along the right edge of the screen.
Press the "PIP" button a third time to remove the sub-picturesfrom the screen.
NOTE:
1.
If no buttons are pressed when in MULTI-CHANNEL PIP mode, autoscanning will continuously scan.
2.
If a channel is tuned during this MULTI-CHANNEL scanning, sub-pictureswill be removed from the
screen.
SWAP button
If you wish to switch what is being shown on the main pictur. _ to the sub-picture, press the "SWAP" button.
NEWS
STEREO
STISA
VIDEO:I
SWAP
NOTE:
The SWAP button will only operate when SINGLE PIP mode is chosen.
The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be
displayed as a sub-picture).
(_
MOVE button
To move the sub-picture to another corner, press the "MOVE" button. The sub-picturemoves one step counter-
clockwise every time the "MOVE" button is pressed. (Example below illustratesthe "MOVE" operation for initial
shipping conditions. If you have customized a PIP position,the "MOVE" operation may differ slightly from this
example.)
It is also possible to customize one PIP position. To do this, simply use the remote control CURSOR buttons
while the sub-picture is displayed, to shift the sub-pictureto a positionyou prefer.
MOVE
0
NOT_E:
The MOVE and CUSTOMIZING PIP position functions will only operate when SINGLE PIP mode is
chosen.
2O
Advertisement
Table of Contents
