Table of Contents
Advertisement
REAR PANEL JACKS
©
+o
L,...I_
CONVERTER
o
MATRIX
SURROUND
ANT B
0
k
(
S-VIDEO
®
(_
Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B.
ANT A input can be displayed as a Main Picture or Sub-Picture. ANT B can only be displayed as a Main Picture.
(ANT B cannot be displayed as a PIP sub-picture.) The antenna output labeled "TO CONVERTER" allows the
ANT A connection to pass directly to a different source such as a cable box.
(_
Audio/Video Inputs 1,2
The "INPUT" button will step througheach video source and antenna source input each time it is pressed. Use
the audio and video inputs to connect external devices, such as VCR's, camcorders, laser disc players, etc. (If
you have mono sound, insert the audio cable into the left channel jack.)
(_
Monitor Out
These jacks provide fixed audio and video signalswhich are used for recording.
(_) Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo system amplifier. With this connection, the audio
to the stereo can be controlled by the televisions main volume.
(_) Transmitter Out
These jacks provide variable audio output to a set of wireless speakers. They can also be used for another stereo
system amplifier. With thisconnection, the audio can be controlledby the televisions remote control.
(_) Rear Speaker Terminals
These terminals are used to connect external speakers, which are used for the surround sound feature. The vol-
ume level is controlled by the remote control main volume buttons. Use speakers with 8 Ohm impedance only.
(_
S-Video
Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video output capability.
(_) Speaker Matrix Surround Switch
Use this switch to choose between the surround and external speaker features. See page 13 for Audio System
Setup. The TV's Internal Speakers will be switchedoff when "EXT." is selected.
10
Advertisement
Table of Contents
