Advertisement
Available languages
Available languages
HVBOSOABH
manual
8/29/02
8:38
AM
Pag_
[imi[a[ions
Do not install your wine cooler in any location
not properly
insulated
or
heated e.g. garage
etc. Your wine cooler
was not designed
to operate
in temperature
settings below
55 ° Fahrenheit.
Select a suitable
location
for the wine cooler
on a hard even
surface away
from direct sunlight
or heat source e.g. radiators,
baseboard
heaters,
cooking
appliances
etc, Any floor
unevenness
should
be corrected
with the leveling
legs located
on the front and rear
bottom corners
of the wine cooler.
• Built-in wine coolers need to be ventilated
from the front. This feature
allows the unit to be built in an enclosed
area, The bottom
front grille
should
be clear of all obstructions,
This is absolutely
necessary for the
air to circulate
and for the unit to operate
efficiently,
The dimensions
for
installation
are as follows.
(W x D x H)
Unit Dimensions: 23 7/8 x 23 3/4 x 34 11/16
Built-In Dimensions: 24 1/8 x 23 5/8 x 35 3/16
23 3/4
\
Advertisement
