Advertisement
Available languages
Available languages
HVBOBOABH
manual
8/29/02
8 :37
AM
Pag_
I/_
Unpacking
Your Wine
¢oo ÷r
1, Remove all packaging
material.
This includes the foam base and all
adhesive
tape holding
the wine cooler accessories
inside and outside,
Slide out and remove plastic or foam guard
used to secure the
compressor
from shipping
damage
due to vibration
and shock
2, Inspect and remove
any remains of packing,
tape or printed
materials
before powering
on the wine cooler
[÷ve ing
Your
Wine
Ooo ÷r
• Your wine cooler has four leveling
legs which are located
in the
front and rear corners
of your wine cooler
After properly
placing
your
wine cooler
in its final position,
you can level your wine cooler
• Leveling legs can be adjusted
by turning
them clockwise
to raise your
wine cooler or by turning
them counterclockwise
to lower
your wine cooler, The wine cooler door will close easier when the
leveling legs are extended
De¢tri¢am
Requirement
• Make sure there is a suitable
power
Outlet (115 volts, 15 amps outlet)
with proper
grounding
to power the wine cooler.
• Avoid
the use of three plug adapters
or cutting
off the third grounding
in
order
to accommodate
a two plug outlet. This is a dangerous
practice
since it provides
no effective grounding
for the wine cooler
and may
result in shock hazard,
Advertisement
