Advertisement
Available languages
Available languages
HVB050ABH
manual
8/29/02
8:38
AM
Pag_
4.
Remove the door support
bracket
from the opposite
side (left side), by removing
the 2 screws, (fig,3)
(fig.3)
(door suppport
bracket)
5.
To install the bottom
hinge bracket on the opposite
side (left side), you will also
have to remove
one screw hole plug from the left side,
6,
Install the door support
bracket
on the opposite
side (right side), place the
screw hole plug in the bottom
hole.
7,
Remove the light switch bracket from the bottom
of the door by removing
the 2
screws, (fig,4)
(fig,4)
8.
Install the light switch bracket on the opposite
side of the door (upper part), after removing
the screw hole plugs.
9,
Rotate the door by 180 °, This way the light switch bracket
will now be on the
bottom side and the handle on the opposite
side. (right side) Place the screw
hole plugs in its appropriate
hole on top of the door.
10. Carefully
align the bottom
hinge axle hole on the door with the axle of the
lower hinge bracket.
Remember
to have the door level rings in place before you
place the door on its axle.
11, Install the upper hinge bracket
(left side hinge bracket
supplied
as an accessory)
on the left side.
12, Make sure the door is aligned
and then tighten the screws,
Replacing
[i@h[ BuMb
1.
Turn off and unplug
the power
cord of the wine cooler.
2,
To remove the light bulb cover use a philliphead
screw driver to remove
the 2
screws,
3,
Make sure the light bulb is cool before removing
it, Replace using a light bulb
20 watts or less.
4,
After the bulb is secure, install the light bulb cover and replace
both the screws.
5.
Turn unit on to its original
setting after plugging
in the power cord.
lO
Advertisement
