Haier HPR09XC7 User Manual page 2

iMPORTANT POINTS ON SERVICE OPERATING SAFETY
Please follow these instructions careful|y:
• Unplug the unit to avoid any danger from electric shock before disassembling the unit for
repair.
• If there is any sound of the refrigerant circulating when in operation, avoid touching the
cooling coils.
• If you need to perform any welding or soldering, be sure you are in a well ventilated area.
• Only a qualified professional should perform any welding on the unit.
® When repairing the unit, the specifications listed in this manual must be strictly adhered
to when replacing any components.
• When replacing any electrical components they should be factory approved units.
• Be sure that any electrical components are properly wired and in place.
FLOW CHART FOR iNSPECTiNG AND REPAiRiNG THE UNiT
IAIROONDITIONERU
J PLUGAN0S0ONET I jRE-PLUG,N GTNE
/ I/ _ST_NGBY H I
AIRCONDITIONER
WON'T COOL
PROPERLY
J COMPRESSOR WON'T I I CHANGE THE
J R EFR,CERANT
1 LEAKAGE _
_LL_I'tUU|INU _ J NITROGENGASFROMLOW-PRESSURESIDEAND _ ............. ,
THESYSTEM
USEOXYACETYLENE ANDPLUS5%
__SILVER SOLDER TOWELDTHE CHANGE C OOLANT AND
I RUNNING TEST I,_
-1-