Haier Room Air Conditioners User Manual page 13

Fig. # 7
Control
Timer start or Timer stop mode is used to pre-start or shut off your unit in
advance. You can program this up to ! 2 hours in advance. You can use
the Timer in 3 Functions i.e. A/C, Dehumid. or Fan Only
eTimer Start. (See Fig. # 7)
Unit must be on to set the timer. Unit will shut down automatically after it
accepts the settings in 5 seconds Use this mode to pre-sef the start time of
the unit 12 hours in advance.
a) Press Start, LED dispUay wilU show "XX" (time set Uasttime) when power
is connected first time, LED display wiUl show "01" .
b) Set desired number of hours by pressing the (+) pad of the Temp/Time
buHons, one for each hour. If you passed the desired time use the 1-1pad
key to lower the selection.
oTimer Stop (See Fig # 7)
Unit must be running to set the timer off. Use this to preset the time you
would like the unit to shut off.
a) Press Stop, LED display will show "XX" (time set last time) when power
is connected first time, LED display will show "01"
b) Set desired number by pressing the (+) pad of the Temp/Time buttons.
One for each hour. If you passed the desired time, use the (o) pad key to
lower the selection.
When using the timer the unit wilJ use!revert to the last A/C and fan
settings when activated. The timer must be reset every time you choose to
use it.
PQ_e_
Ha Jet
O©O
Pressingthe mode one time, the settingof Timer start, Timer stop and sleep
can be done. Pressingthe mode For a second time, the setting is cancelled.
12