Advertisement
Available languages
Available languages
After you
plug
in the unit it wi[[ perform
a self test. A[[ the
display
tights
will turn on for 3 seconds. The LED display
will read "88".
If any dispnay
light fails to turn on you may need service on the unit. After the 3 seconds
self test the unit will automatically
go to the stand by mode.
Now all lights
will be off and you wilt have to turn "ON"
by pressing
the On/Off
key
After pressing
"On/Off",
the unit starts to work and enters the status of
"Fan Only"
with low
seffing. You will
have
to press the (+) or (o} key on
the
TempiTime
to set the temperature
af your desired
comfort.
You can choose
bebNeen 61 °F and 86°R Once the temperature
is set you can raise or
lower it by pressing
the (+) or (o) keys. (Only when the unit is cooling
or
dehumidi_ing,
can the temperature
seffing be adiusted.}
(See Fig, # 2)
PaneH_
FA_
MEO
_L_EP
Having set
the
temperature you will set the function of the air conditioner.
mf y ou want to cool the room press the AiC function, mf y ou need to onJy
remove the moisture press the Dehumid function. If you iust need to use the
fan only, press the Fan function. (See Fig. # 3)
Advertisement
