On The Air Conditioner - Goldstar R1402 Owner's Manual

About the ntrols on the Air Conditioner
The controls will look like one, of the following.
i
Thermostat
Off
M_ _n
Low _n
High COol
M_ Cool
Low Cool
- Turns air conditioner off.
o Med speed fan operation without cooling.
o Low speed fan operation without cooiing.
o C_ling with high speed fan operation..
- C_ling with reed speed fan operation
- C_ling with low speed fan operation.
This automatically controls the temperature of the indoor air.
Turn the knob so that arrow points to the larger marks for greater
cooling. Point the arrow to the simaller marks for more moderate
cooling.
(i.e. the higher number the greater _oling)
• FOR NORMAL COOLING
1. Turn the Operation Knob to the High Cool from the
Low Cool setting.
2. Set the Thermostat control to the desired
temperature mark i (the mid-point is a good
starting position). If the room temperature is not
satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as
appropriate.
• Auto Swing
On : Air swing is operated while Operation knob
is set to the _1 position.
Off : Stops the operation of air swing
3_
4_
• FOR MAXIMUM COOLING
1. Turn the Operation Knob to the High C_I setting
2. Set the Thermostat control to the largest ,_,
temperature mark.
• FOR QUIETER OPERATION
1. Turn the Operation Knob to the Low Cool setting.
2. Set the Thermostat _ntrol as needed.
When the air conditioner has been performed
its cooling operation and is turned off or set
to the fan position, wait at least 3 minutes
before resetting to the cooling operation
again_