Reversing The Door Swing - GE 22 Owners And Installation Manual

Installation instructions
INSTALLING THE WATER LINE
(CONT.)
I_ PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it does not vibrate
against the back of the refligerator or against the
wall. Push the refligerator back to the wall.
START THE ICEMAKER
Set the icemaker power switch to the / (On)position.
The icemaker will not begin to operate until it reaches
its operating temperature of 15°F (-9°C) or below.
It will then begin operation automatically if the
icemaker
power switch is in the I (0/1)position.
NOTE: In lower water pressure conditions, the water
valve may tuin oil up to 3 times to deliver enough
water to the icemaker
REVERSING THE DOOR SWING
IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Handle parts careflflly to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for the doors.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These insuucfions are for changing the hinges flom
the right side to the left side--if you ever want to
change the hinges back to the right side, follow these
same insuuctions and reverse all references to left
and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Phillipsscrewdriver
Masking tape
3/4" Headsocketdriver
(a 6-pointsocketis
recommended)
T20 or T25Torxdriver,
whicheveryourmodel
requires
Puttyknife or
thin-blade screwdriver
18