Hoover concept two U4217 Owner's Manual page 16

The belt
The belt drives the agitator and is
important for the efficient opera-
tion of your cleaner. Because of
this, when buying a new belt, you
should always insist on a genuine
HOOVER belt. Some other belts
on the market, not manufactured
under the Hoover design and
quality controls, may not operate
the agitator correctly and may
damage your cleaner.
When to replace belt
Check from time to time to be sure
the belt is in good condition. If
it is stretched, cut, or broken,
it should be replaced.
How to replace agitator
belt
Disconnect cleaner from electri-
cal outlet before replacing belt.
Place the cleaner on the floor. For
ease in installation, follow the
directions given below and posi-
tion yourself to the left, rear of the
cleaner.
AGITATOR BELT
1. Turn cleaner over. Release
handle to lowest position. Remove
plate on bottom of cleaner by re-
leasing clips. (See illustration)
2. Remove bottom plate as shown.
15