Hoover U4730 Owner's Manual page 9

TOOL REQUIRED: PHILLIPS ORFLATHEAD S CREWDRIVER
WARNING: TOREDUCE THERISK OFINJURY FROM MOVING PARTS - UNPLUG BEFORE S ERVICING.
TO REPLACE EDGECLEANING BRISTLES
Remove two (2)screwsfrom
eachedgecleaning bristle.
Remove anddispose o f oldbristles
andreplace with newbristles or=
eachside.
Replace a ll four (4) screws
tosecure.
TOOLREQUIRED: PHILLIPS SCREWDRIVER
WARNING:TO REDUCE T HE RISK OFELECTRIC S HOCK - UNPLUG CLEANER BEFORE REMOVING O RREPLACING
LIGHTBULB.
Thiscleaneruses a commonautomotive lamp#906,13,0 volts.For bulbreplacement c all1-800-944-9200
or yourlocalauto partsstore,
Lean cleaner handle Liftlenscoverto remove. Pull bulboutof socket. Securethe headlight
back. Remove the two Do NOTtwist. Gently lens by replacing_e
(2) screws located push bulb into socket two (2)screws.
on either side of the toreplace.
headlight l ens.